GRS – Guide Retainer Sets Attachment Mass

Note: Deceleration of the pad may cause pad flexing to occur. Add additional GRS to the center to prevent side load from inertial deflection at end of stroke travel. Lighter pads may result in a flexible structure requiring center support. Heavier pads will require additional GRS to distribute the weight according to the shape and die steel attachments.

GRS Product Input

Guide Rod Series:

-select-GRSGRS.HD

Guide Rod Dia (mm):

Guide Rod Options:

Retainer Mount Options:

Pin Extension Code:

Dimensions:

XS:

PL:

T Max:

Dimensions:

XS: mm

PL:

Custom:

Press Inputs

Pad Mass:

kg lb

Ram velocity at extension:

Enter Velocity

m/s mm/s in/s fpm

Calculate Velocity

Strokes Per Minute:

Stroke Travel (crank):

mm in

Pad Travel:

mm in

Velocity:

Calculated Load Attachments

Max Attachment Mass/Unit

Qty Recommended/Pad

* For optimal printing, go to print settings and change the margins to default and the scale to 60%.

Reset

Part number denotes model and force based on DADCO product details and operating specifications. Refer to OEM standard for specific part number and operating guidelines. The calculated values are estimates for current revision DADCO products based on normal operating conditions. Calculations provided may differ from product literature recommendations based on rounding. Excess side loading forces, contamination, misalignment and other die construction factors may increase operating temperature. Attachment mass assumes balance load and actuation force. Do not exceed the ram velocity per lifter. This SOFTWARE is distributed for your convenience, but without any warranty. DADCO makes every effort to present accurate and reliable information and reserves the right to make changes without notification. Reliance upon or use of the SOFTWARE or any of its outputs are at your own risk. With use of this SOFTWARE in no event shall DADCO be liable for any direct, indirect, incidental, punitive, or consequential damages.